When the office connection feels unreliable, it is tempting to ask for a faster router. Before choosing equipment, write down where work stalls, which devices are involved and what a successful result would look like. That gives the person assessing your network something specific to investigate.
You do not need to diagnose the network yourself. Your job as an office manager is to capture the working conditions, agree priorities and make sure the proposed solution is tested against them.
Map the rooms and the work that matters
Use a simple floor sketch. Mark desks, meeting spaces, the reception counter, stock areas and any other place where people need a connection. Note internal walls, separate floors and access restrictions. Add existing network equipment, available cable routes and power points where known.
Floor dimensions, building materials, user density, applications and cabling all contribute to a wireless survey brief. A planning drawing helps, but proposed access-point positions still need onsite assessment. WatchGuard’s site-survey guidance explains these inputs.
Give each area a practical requirement: “Accounts must open the shared application here” is more useful than “full Wi-Fi everywhere”. Identify any spaces where a connection is optional, so the first phase has a clear boundary.
Count the devices working at the same time
List laptops, phones, tablets and any other devices that actually use the wireless network. Record what they do and when several are active together. Include visitors and planned changes, such as a new team or a meeting room used for video calls.
Coverage alone is not the whole design problem. Capacity, interference and application needs also matter. HPE Aruba’s radio-frequency design guidance addresses these factors and the need to validate the design.
Avoid choosing an access-point quantity from floor area alone. Ask the assessor to explain how the proposed layout supports your rooms, devices and busy periods, and which assumptions still need testing.
Record symptoms before changing equipment
Keep a short log of interruptions. Include the time, location, device, task and visible symptom. “The call audio broke up in the boardroom while other desks were working” provides a starting point. “The internet is bad” does not identify what to reproduce.
Ask the technician to distinguish the internet connection, the office’s wired network, Wi-Fi, individual devices and the application being used. The symptom log is evidence to investigate, not proof that any one of these is at fault. Record whether other people saw the same problem at the same time. Do not change shared equipment or access settings just to test a theory during business hours.
Illustrative example — a fictional office, not a customer result or network design. The following notes give an assessor three different questions:
| Work area | Observed interruption | Assessment question |
|---|---|---|
| Reception | A tablet sometimes fails to save an order | Is the problem reproducible on this device, at this location and in this application? |
| Meeting room | Call audio breaks up when the room is busy | What happens with the usual participants and devices during a representative call? |
| Accounts | Both a wired desktop and a Wi-Fi laptop lose access together | What shared connection or service should be checked before assuming wireless coverage is the cause? |
Decide what visitors need to access
Write down whether guests need internet access only or any specific office resource. Identify who should approve that access and when it should end. Bring the same questions for shared devices and contractors.
Ask the technician how the proposed arrangement will keep those access rules separate and how it will be checked. Agree who owns administration after the work is complete. The planning worksheet should contain requirements and an authorised contact, never passwords or access codes.
Compare the smallest useful options
Ask for the assessment findings before approving a shopping list. A sensible proposal should connect each change to an observed problem or an agreed requirement.
- Keep the current setup: appropriate when it meets the agreed work requirements and the reported problem is traced elsewhere. Record the findings and the remaining action owner.
- Adjust part of the setup: worth considering when the assessment identifies a specific placement, configuration or cabling issue. Ask what the adjustment covers and what it leaves unresolved.
- Upgrade or extend: consider this when the existing setup cannot support the required work, growth or access arrangements. Ask which existing equipment can remain and what evidence supports replacement.
Compare installation work, interruption time, ongoing charges, support responsibilities and future administration as well as equipment prices. Confirm these in the actual proposal; a general guide cannot establish your site’s costs or coverage.
Agree the acceptance test before installation
Turn each priority into a task someone can demonstrate. Use the actual devices and applications staff rely on. Cisco’s wireless network solution guide explains why measurements should account for the client device and why the resulting implementation needs testing and tuning.
Agree the test conditions, who will attend and what counts as acceptable before the work starts. Include the busiest relevant areas and any necessary movement between them. Record results against the same brief afterwards, along with unresolved items and who will address them.
Also agree a change window, a way to continue essential work if the change takes longer than expected, and the handover material you need: equipment locations, an authorised administration owner, support contacts and the agreed configuration record.
Bring a useful brief to your network enquiry
Download the planning worksheet
Complete it with your team: work areas, concurrent devices, symptoms, guest requirements and acceptance tasks. Mark unknowns clearly. A short, accurate brief is more helpful than a confident guess about equipment.
For an office in Eswatini preparing a network enquiry, start with BusiQuip’s IT networking service. Bring the brief and ask for an assessment scope, proposed next steps and the costs before agreeing the work.






